Pump Equipment
RS Clare, in conjunction with partners, has developed a streamlined range of high pressure pump equipment suited to handling our heavy duty valve lubricants and sealants.
Pump equipment for valve lubricants
Often, after such products are selected, what can impede or stop the job is not having a pump system with sufficient capability to inject these products into the valve.
We have also developed bespoke stroke counters for their pneumatic pump systems, which allow the Operator to accurately monitor and record how much grease is being injected into the valve. Too little grease, and the valve will not be properly lubricated and protected; too much grease and the excess will exude down the flow line or down the tubing, both of which are undesirable situations.
Critical Factors
- The achievable pumping flow rate is critical when filling gate valves, often with large cavity volumes where time taken at the wellhead for maintenance is expensive.
- It is imperative that the pump can always deliver injection pressure, at the hose end, which is above Shut In Tubing Head Pressure (SITHP).
- Care must also be taken on configuration of the delivery hose and fittings, to ensure minimal flow restriction, and the ability to safely vent any trapped line pressure.
RS Clare 70:1 Pump System
For use with Valve Lubricant 601™ the RS Clare 70:1 Pump System is compatible with 12.5kg and 18kg European specification pails, a system is also available for US 5 gallon specification pails. A range of accessories are…
16G Heavy Duty Pump System
An extremely robust and low maintenance pump system specifically for use with 16 Gallon/120-130lb/50-70kg drums. Suitable for pumping very viscous lubricants and sealants at high flow rates, the system is ATEX Zone 2…
Valve Lubricant Bucket Pump Package
This manual bucket pump system is hand operated and suitable for pumping Valve Lubricant 601™. The hose end assembly is 5,000 psi rated and includes a safe-vent coupler rated to 10,000 psi, featuring a…
RS Clare 100:1 Pump System
Suitable for pumping viscous heavy duty valve lubricants and sealants at high flow rates, the system is compatible for use with European specification 18kg and US specification 5 gallon pails. The full system includes a portable…
RS Clare Heavy Duty 55G 80:1 Pump System Package
Designed for ease of operation, robust, and low maintenance. 8,000 psi, 80:1 ratio Heavy Duty Pump (max output pressure, pressure can be regulated down). Suitable for pumping very viscous Valve Lubricants and Sealants at…
High Pressure Hand Gun
Our heavy duty hand-held injection gun is configured for our valve lubricant or sealant cartridge packs (0.45kg size) and can develop pressure to 5,000 psi as and when required. It comes complete with a safe vent coupler that…
Valve Cleaner Bucket Pump Package
Ideal for injecting 601 Valve Cleaner up to 5,000 psi, our Valve Cleaner Bucket Pump Package is a heavy duty manual bucket pump solution for oils and fluids. The reservoir capacity is approximately 15 litres and…
Did you know?
Our Heavy Duty 16G Pump System Package is capable of pumping very viscous, heavy duty valve lubricants and sealants at high flow rates.
Talk to an expert in our Oil & Gas team
"*" indicates required fields